tps-75-dc-rectifier-battery-charger

DC Power Rectifier for Ground and Mobile Support C4ISR, UAV & Mission Control
The Tactical Power Supply (TPS) Collection by API Technologies is a portable Commercial-off-the-shelf (COTS) DC Power Rectifier designed as a fielded generator for powering command & control communications systems and other critical EW & weapons equipment. The TPS features weatherproof & ruggedized construction which allows our rectifiers to withstand extreme temperatures (-40°C to 85°C) and harsh environments including shock, vibration, and water spray. When fielded, the DC rectifier reduces fuel consumption and wear and tear on vehicles by eliminating run time to support powering fielded special ops equipment.

The Tactical Power Supply can accept power from generators or community power and converts AC power to 28 Volts of DC power at a variety of amperages (including 150A, 100A, 75A models). Sources of AC supply to the dc power rectifier can be one of three different AC inputs. (A variety of source-power to TPS cable assemblies are available.)

  • 1 x Three Phase WYE, 208/120 VAC
  • 1 x Single Phase, 240/120 VAC Mid-Point Neutral
  • 3 x Single Phase, 100-127 VAC

The Tactical Power Supply includes a battery charger that delivers 28 Volts of DC power @ 10A to a connected battery. The battery charger features a battery detect to ensure one is connected and determine charge state and float charge the battery to 100% for immediate crank ready state. Reverse polarity protection is included in the rectifier’s battery charger.

The TPS has a built-in “soft start” feature, circuit protection, and transient voltage suppression as well as an automatic overtemperature shut down to protect the rectifer and critical loads. Integrated in this unit is forced air cooling and heat sinks to aid in heat dissipation. A local “push to view” status indicator button on the front panel of the unit is available to manually check status for AC inputs, DC output, LAN connection, Transient Voltage Suppression (TVS), battery charger, and temperature.

The TPS provides remote monitoring of battery charge state, circuit breaker status, DC outlet status, line current, voltage, power factor, AC input status, input voltage, internal temperature. User is also able to remotely turn the DC outlet on/off, turn the battery charger on/off, create alarm limits for temperatures, current, voltage, and more. Remote communication and monitoring protocols include Telnet, SnMPv2, and Web Interface.

Portable DC Power Supplies are available with or without features such as: Battery Charger, Remote Communications, EPO (Emergency Power Off), Roll Cage, Mounting Brackets, Weather-Proofing, Cable Sets, Junction Box, and more


Features:

  • Rugged Mobile 150 Amp DC Power Rectifier
  • 150 or 75 Amp DC output options
  • AC to DC Rectifier
  • Rugged Mobile 150 Amp DC Power Rectifier
  • AC Power source:
  • 1 x Three Phase 4 Wire WYE,
  • 190-220 L-L VAC;
  • 1 x Single Phase, 240/120 VAC,
  • Mid-Point Neutral;
  • 3 x Single Phase, 100-127 VAC
  • Rugged Mobile 150 Amp DC Power Rectifier
  • Integrated battery charger;
  • 28 Volts of DC power at 10A;
  • Battery detect feature to ensure connection and state of charge;
  • Reverse polarity protection included;
  • Rugged Mobile 150 Amp DC Power Rectifier
  • Auto over temperature shut down
  • protects critical loads; Withstands extreme temperatures, shock and vibration;
  • Weatherproof and waterproof housing;
  • Meets MIL-STD 810 and MIL-STD 461;
  • Rugged Mobile 150 Amp DC Power Rectifier
  • Remote monitoring with user enabled remote ON/OFF for the DC outlet and the battery charger. Alarm limits creation for line input voltage, and more.
  • Telnet and Web Interface communication and monitoring protocols.

Specifications:

Part Number Output Voltage Output Current Weight Dimensions
7200-A-155 150 Amps @ 28VDC 4200 Watts 75 Pounds 17″ W x 17.475″ H x 13″ D
Optional Mounting Brackets and
Roll Cage Options Change Dimensions
7200-A-161 75 Amps @ 28VDC 2100 Watts 55 Pounds 13.75” W x 10” H x 15.70” D
Optional Mounting Brackets and
Roll Cage Options Change Dimensions
Input and Output
AC Power Entry Connector MIL-DTL-5015, 28-1P Locking Bayonet Connector
Source Power Single connector permits three types of input power
➜ 1 x Three Phase WYE, 208/120 VAC
➜ 1 x Single Phase, 240/120 VAC Mid-Point Neutral
➜ 3 x Single Phase, 100-127 VAC
Input Frequency 47 – 63 Hz
Input Current 20A/Line @ Full Load
Overload Protection 25A/3P Circuit Breaker, Flat Rocker Style
DC Output Connectors MIL-DTL-5015, 32-5S Locking Bayonet Connector
Physical & Environmental
Operating Temperature -40°F (-40°C) to 185°F (85°C)
Mechanical Characteristics Enclosed, Waterproof Chassis Rugged construction designed per MIL-STD 810
Features
Communication Interface 10/100 BaseT Ethernet
Network Interface TCP/IP, Telnet, SNMPv2, HTTP
“Push to View” Status Indicators Push to View Test:
Push to View Test: AC Power Input, DC Power Output, Battery Charger, LAN, High Temperature, Transient Voltage Suppression (TVS)